MACH III離合器C5H2K-STH現貨特價供應

盤式制動器的不足之處在于摩擦片直接作用在圓盤上，無自動摩擦增力作用，制動效能較低，所以用于液壓制動系統時若所需制動促動管路壓力較高，須另行裝設動力輔助裝置；兼用于駐車制動時，加裝的駐車制動傳動裝置比鼓式制動器要復雜，因而在后輪上的應用受到限制。

常閉制動器原理：嵌盤式常閉氣動制動器，跟常開制動器區別就在于：常開制動器是通氣抱閘，就是通氣剎車，一通氣兩邊的夾鉗就夾起來了，常閉制動器如圖所示，一直處于夾鉗加緊狀態，通氣后就松開，所以平常狀態下，常閉制動器一直處于剎車。常閉制動器彈簧施力制動，氣動驅動釋放。

圓錐摩擦離合器：摩擦件為截錐體，分單錐和雙錐兩種。這種離合器結構簡單，接合平穩，分離徹底；能產生較大的摩擦力，摩擦面磨損后一般不需人工調整，由于單錐式只有一對圓錐摩擦面，雙錐式也只有兩對摩擦面，如要傳遞大扭矩必須增大錐體的徑向尺寸。減小錐角可增加摩擦力，但內外錐面不易分離。通常，摩擦面材料為金屬-金屬時，錐頂半角應不小于7°；為皮革-金屬時，應不小于12°。

Our products are delivered bored and keyed to fit the shaft size you specify. If you need a sprocket or pulley on the pilot, we will machine and install it prior to shipment.
Long Lasting, Low Maintenance


When properly applied, installed and operated, our products can last for years with little attention and wear parts are field replaceable.

M8R2K-STL
MAR2K-STL
MBR2K-STH
M3R2R-STH
M4R2R-STH
M5R2R-STH
M6R2G-STH
M3R2R-STL
M4R2R-STL
M5R2R-STL
M6R2G-STL
M5G2K-STH
M6G2K-STH
M8G2K-STH
MAG2K-STH
M5G2K-STL
M6G2K-STL
M8G2K-STL
MAG2K-STL
MBG2K-STH
M3G2R-STH
M4G2R-STH

Astrosyn offers the widest range of high performance electrical rotating components and electronics with a diversity of choice to satisfy the market place's demand for the keenest cost effectiveness.